Ultra C Pro is the factory blend of Ultra C and Liquid Enhancer and is an enhanced treatment for more severe cases of iron oxide, manganese oxide and iron bacteria contamination.
Ultra C Pro dissolves deposits more effectively, extends treatment times and provides a faster reduction of iron related bacteria.
Safe, easy to use and fast acting, in just 24 hours Ultra C Pro will:
- Remove all deposits and contamination
- Improve water quality
- Increase water flow
- Extend the life of pumps and equipment
Approved by the Secretary of State in the UK Ultra C Pro is a specially formulated proprietary blend of monohydrates and organic acids based on leading independent research. One of its key components, oxalic acid, is a naturally occurring organic acid which is biodegradable.
Supplied in a solid crystal form Ultra C Pro can be added directly to the water supply without dismantling the pump and associated equipment.
How to Recognise the Problem
Any of the following symptoms will indicate a problem with iron bacteria or iron oxide deposits:
- Rusty slime inside pipes
- Cloudy, rusty water at pump start-up
- Reduced water flow from the bore
- Slimy deposits blocking main lines and laterals
- Unpleasant odour in water pumped from the well
- Slimy, rusty deposits in drippers and sprinklers
- Severe staining on pavements, walls foliage.
- Blackish-brown deposits indicates the presence of manganese oxide
What happens if you leave your well or equipment in these conditions?
This will lead to a decrease in water well efficiency which will increase energy costs and damage your equipment.
|
NSF/ANSI 60 BoreSaver Ultra C PRO is manufactured in the UK and approved by NSF for potable water supplies, it is safe, environmentally friendly, easy to use and biodegradable. The NSF certification is a mark of distinction that BoreSaver Ultra C PRO provides assurance that the product is safe for use in drinking water. Feel reassured with our NSF approved UVT Safety Feature, shine a UV light on the clearance to prove the absence of any BoreSaver residuals. |
How to Use BoreSaver Ultra C Pro
BoreSaver is safe, easy to use and biodegradable.
Simply follow the BoreSaver four step process for clean, fast-flowing water:
1. Identify which BoreSaver cleaner you need with our range guide
2. Work out the amount you need with our dosage table
3. Pour BoreSaver straight into your well or borehole, recycle the water, surge and leave in for 24 hours.
4. Flush out your well or borehole by using any of the standard methods. Surging and brushing, air-lifting or pump-in recycling will safely pump the deposits and contamination away.
Aftercare: Use BoreSaver as part of a regular maintenance programme to keep your well or borehole trouble free.
Looking for further advice, please contact us.
Technical support & evaluation available.
Did you know?
- Iron bacteria and iron oxide contamination is estimated to affect over 40% of the world’s water bores.
- Mineral contamination restricts water production and clogs up pumps and pipes.
- Accumulated deposits can increase maintenance problems and create unpleasant working conditions for operators.
Iron Bacteria Contamination
Whilst all iron oxide deposits can be removed, it is not possible to completely eliminate iron bacteria contamination. However, regular use of BoreSaver Ultra C Pro can completely minimise the problem and ensure the water supply and pumping equipment is working at maximum efficiency. The frequency of follow up cleaning will be determined by the natural conditions in the system although a twice yearly maintenance programme is recommended.
Want to know more?
Click here to read our case studies.
Please contact us if you need any assistance: info@millarsproducts.com
